Thermally Enhanced Door System

Metal Technology’s System 5-20D Hi+ offers the Belfast Bifolds 7 Aluminium Systems a wide and diverse range of profiles that will provide structural integrity, weather performance, thermal enhancement, and security. Now a highly cost-effective entrance door solution, the System 5-20D Hi+ complies with both BS 6375 and PAS 23/24. Security testing covers standard, panic and electric release options.

Thermal Performance
Metal Technology’s range, in conjunction with the correct glass specification, is designed to aid compliance with the latest thermal requirements of the current building regulations. The polyamide thermal break profiles have been specifically designed to minimise heat transfer across the door profiles.

Thermal performance is further improved through the introduction of specially designed foam profiles. These reduce radiation heat loss across the air cavities within the door profiles to provide additional thermal enhancement.

Security
This system has passed PAS 24 “Enhanced Security Performance Requirements for Door Assemblies” as generally accepted on Secure by Design projects.

Materials
Aluminum profiles are extruded from aluminium alloy 6060T6, T5 or T4 complying with the recommendations of BS EN 12020-2 / BS EN 755-Parts 1 to 9. Polyamide thermal breaks are produced from glass reinforced nylon sections designed to withstand temperatures in excess of 200°C, allowing the sections to be powder coated after thermal breaking.

Construction
Frame and door sash members are mitre cut at 45°. Corners are reinforced with extruded aluminium crimping cleats and corner braces. A secure joint is formed by pneumatically crimping into the extruded crimping cleat. Mullion and transom bars are square cut, shaped and fixed securely to the frame by means of stainless steel screws and fixing cleats. All frame joints are sealed during construction against entry of water using Metal Technology’s two part adhesive. Metal Technology recommend that only A2 or A4 austenitic (300 series/class 70) stainless steel fixing screws are used in the assembly of their products.

Finishes
The range of sections can be provided in either of the following ranges of finishes:

Anodised to BS EN 12373-1 or BS 3987
Powder organic coated to BS EN 12206-1
Metal Technology’s powder coating is produced to Qualicoat standards.

Glazing
This system offers internally glazed sashes and can accommodate glazing units from 24mm to 44mm units.

Brochure Download